ArmorTrak Rubber Textured Non-Slip Epoxy Coating
Industrial-grade anti-slip coating for any surface — indoor or outdoor. Proprietary dehydrated rubber granules become part of the epoxy when cured. The grip that doesn't wear out.
Ultimate Non-Slip Protection
ArmorTrak is a rubber-textured epoxy coating that provides superior anti-slip protection on virtually any surface. Unlike standard coatings with rubber beads that wear off the surface over time, ArmorTrak uses proprietary dehydrated rubber granules that are chemically incorporated into the epoxy when it cures — they become part of the coating permanently.
The result is a flexible, rubber-like finish that grips in wet or dry conditions and keeps its grip long after standard rubberized coatings go bare and need recoating or complete removal.
Available in safety colors for hazardous areas — yellow, red, orange, and all standard industrial safety colors for high-visibility anti-slip marking on ramps, stairs, and work platforms.
Key Performance Features
Why ArmorTrak outlasts standard rubberized coatings: Cheap rubberized coatings use rubber beads mixed into paint — they sit on the surface and wear off with traffic. ArmorTrak uses dehydrated rubber granules that expand and chemically bond into the epoxy matrix during cure. They can't be worn away without destroying the coating itself.
Ideal Applications & Surfaces
ArmorTrak bonds to virtually any surface and creates a rubber-textured anti-slip finish on:
Proprietary dehydrated rubber granules chemically bond into the epoxy matrix — not surface beads that wear away.
Key Use Cases
Marine & Pool Applications
100% saltwater resistant and completely waterproof — the go-to coating for boat decks, docks, pool decks, and any wet environment. The rubber-textured finish provides secure footing even when soaking wet. Used by marinas, boat manufacturers, and commercial pool facilities.
Industrial & Commercial
Extreme abrasion resistance handles forklift traffic, heavy equipment, and constant foot traffic. The flexible rubber-like finish absorbs impact and resists chipping — ideal for warehouses, manufacturing facilities, loading docks, and work platforms.
Stairs, Ramps & Safety Areas
Available in all safety colors for OSHA-compliant anti-slip marking. Bonds to metal, concrete, fiberglass, and wood stairs and ramps. The 575 PSI adhesion ensures it won't peel from high-flex surfaces like metal grating and open deck.
Unmatched Adhesion Technology
575 PSI bond strength is unprecedented. In adhesion testing, the concrete substrate fails before ArmorTrak separates. Once cured, it cannot be removed without destroying the surface underneath — permanent anti-slip protection.
Technical Specifications
| Property | Specification |
|---|---|
| Application temperature | 39°F to 95°F |
| Dry film thickness (2 coats) | 35–40 mils |
| Operating temperature range | -60°F to +200°F |
| Adhesion strength | 575 PSI — concrete substrate fails before coating separates |
| Abrasion resistance | Tabor wheel, 1000g load, 1000 cycles: 30.5mg loss |
| Saltwater resistance | 100% — marine-grade performance |
| Flexibility | Total flexibility — crack-free finish on moving substrates |
| Pot life | 2 hours working time |
| Recoat time | 5–6 hours between coats |
| Walk-on time | 12–24 hours |
| Full strength cure | 48 hours |
| VOC content | 2.08 lbs/gal |
Built Once. Done Right.
ArmorTrak can be trusted to perform as advertised — ensuring your project's success with long-term durability.
Need Expert Guidance on Your Project?
Get custom recommendations, surface-specific advice, and volume pricing.
866-532-3979 | www.armorgarage.com | info@armorgarage.com | 860 Springfield Ave, Union NJ 07083
ArmorTrak Color Chart
Military grade flexible polyurethane coating — available textured (with proprietary dehydrated rubber granules) and smooth versions. Single component – no mixing needed. Click any swatch to zoom.
ArmorTrak can be used for literally hundreds of applications on anything or anywhere a flexible textured coating is required, indoors or outdoors. For vehicle traffic we strongly recommend using black to hide tire marks.
APPLICATION:
ArmorTrak is sold as a per square foot product to ensure you have enough material to complete your project properly.
For all surfaces other than concrete, wood and previously coated surfaces, Bonding Primer must be used first. Wood and previously coated surfaces should be rough sanded clean, concrete surfaces, ceramic and porcelain tiles should be acid etched with muriatic acid in a 3 parts water to 1 part acid ratio and then neutralized with TSP at 1lb/1000 sf. New concrete should be etched twice to remove all curing residues and open the pores completely. In general all surfaces must be clean and dry prior to application of the ArmorTrak Coating.
Once surface is clean and dry, application is simple. If using the Bonding Primer, stir contents in can till uniform in color. Apply with lint free 3/8” nap roller and let dry overnight. Coverage of primer is 400 sf/gal.
Mix ArmorTrak in can with jiffy mixer in electric drill on medium speed to suspend rubber granules, do not shake can to stir. Apply ArmorTrak first coat with supplied ArmorTrak roller. First coat should go on thin to cover surface. Allow first coat to dry to the touch usually 3-4 hrs. Apply the second coat perpendicular to first coat if possible with the textured ArmorTrak roller. Second coat will get better coverage and should even out the look. ArmorTrak can be applied by brush where coating with roller is not feasible.
Allow to dry overnight prior to foot traffic. ArmorTrak should be allowed to dry for 24hrs before light traffic. Once ArmorTrak has fully cured in 48 hrs it is as tough as nails and will provide many years of service.
PLEASE NOTE THAT THE MINIMUM ORDER SIZE 150 SF AND THEN IN 75 SF INCREMENTS. ORDERS FOR LESS THAN 150 SF WILL NOT BE PROCESSED.
