Marine 590X Epoxy Coating

$220.00
SKU:
MEC590
Selected Color is
Total Price:
(Unit Price = )
Adding to cart… The item has been added

 Wet Surface & Underwater Epoxy

Two-part epoxy coating for steel and concrete in marine and wet environments. Marine 590X applies to wet surfaces, underwater, and even in the rain — with zero downtime required.

Free Shipping On Orders Of $300.00 • Zero Odor • VOC Compliant
◗
Applies Underwater
Adheres to wet surfaces and can be applied fully submerged. Apply in the rain while staying in full operation.
⚖
Saltwater & Chemical Resistant
Highly resistant to saltwater, impact, and abrasion. Built for the harshest marine and industrial exposure.
★
Self-Priming
No primer needed. Adheres directly to bare steel, tight rust, concrete, and previously coated surfaces.
⚡
Zero Downtime
Apply while equipment stays in service. Perfect for facilities that cannot shut down for maintenance coating.
✔
Zero Odor & Nontoxic
Safe for occupied areas. No fumes, no odor. Meets all VOC laws. Not water-based.
⚙
Stays Flexible
Remains flexible after cure. Ideal for surfaces with deflection, vibration, or thermal expansion.
■
Impact & Abrasion Resistant
Withstands heavy mechanical abuse, impacts, and constant wear in demanding environments.
◆
Indoor & Outdoor
Primarily designed for outdoor marine exposure but equally effective for indoor applications.

Why Marine-590X Is Different

Most coatings require dry surfaces, downtime, and perfect conditions. Marine-590X doesn’t. This two-part epoxy bonds to wet surfaces, underwater substrates, and even surfaces with tight rust — so you can coat piping, tanks, structural steel, and marine equipment without waiting for a dry window or shutting down operations.

Marine 590X wet surface and underwater epoxy infographic — applies underwater, saltwater resistant, self-priming, zero downtime

The coating remains flexible after cure, making it ideal for surfaces that experience deflection, vibration, or thermal movement. Zero odor and completely nontoxic, so it can be applied in occupied, enclosed, and poorly ventilated spaces without disruption.

Surface compatibility: Bare steel, tight rust, concrete, masonry, and previously coated surfaces (tight, non-flaking coatings). Self-priming — no separate primer needed.

Common Applications

Piping & Ductwork
Valves & Pumps
Storage Tanks
Structural Steel
Fences & Railings
Safety Ladders
Manhole Covers
Ship Interiors
Hatchways & Bulkheads
Engine Compartments
Below Interior Waterline
Buildings & Facades

Note: Suitable for ship interiors including below the interior waterline. Not intended for exterior hull duty.

Application at a Glance

Mix Ratio

Part A + Part B, mix with drill-mounted Jiffy mixer

Application Method

Brush, roll, or spray

Working Time

20–30 minutes after mixing

Coverage Rate

230–250 sf/gal (recommended)

Finish

Medium gloss

Coats — Bare Surfaces

2 coats recommended for maximum protection

Coats — Previously Coated

1 coat usually sufficient

Surface Prep

Remove loose rust, paint, or dirt. Adheres to tight rust.

Packaging & Custom Colors

Available in 1-gallon sets and 4-gallon pails.

Custom colors including Off White, Traffic Yellow, and all other safety colors are available for orders of 30 gallons or more.

Technical Documents

Do It Right The First Time With ArmorGarage!

Need guidance or volume pricing for your project? Get expert support from start to finish.

Request a Quote →

Talk To An Expert

866-532-3979

Email Us

info@armorgarage.com

Related Products

Custom tab 1

Custom tab 2

Custom tab 3

Custom tab 4

Custom tab 5

Back to Top
!