-
RENEW IT TEXTURED DECK COATING
$378.00 -
SUPER DECK PAINT - SMOOTH
$105.00 - $115.00 -
RENEW IT WOOD DECK PRIMER
$89.00 -
EPOXY BONDING PRIMER
$120.00
Wood Deck & Dock Textured Coating and Paint
Wood Deck & Dock Textured Coating
Professional-grade non-slip coating for wood, composite, concrete, and tile. Waterproof protection with built-in tractionβno sand required.
Best Coating For Old Or New Outdoor Wood Decks & Docks
Our Renew It Textured Coating Just Got Even Better!
New formulation with added durability and a new wood primer for increased adhesion and the ability to paint right over previous wood stains and deck paints!
Combined with a 7-10 year lifespan, this makes this your best choice for ending your yearly ritual of stripping and repainting your decks or dock with the same deck paint or stain.
Contact us and let us help you make your deck or dock the best in the neighborhood, plus next season you can leave your paint rollers in the garage!
Easy Application!
Super thick, at 1/8" thick, it fills in cracks and nails down splinters. Rock-hard textured finish created by our special blend of breathable coating and aggregate. Cannot be compared to any residential grade deck paints or stains.
Available in 21 different colors or tint base that you can have custom tinted. Easily applied with our textured rollers, it can be brushed after rolling on for a less textured finish if desired.
See the product pages for additional information. Please contact us with any questions you may have regarding the product or its installation. Request A Quote for fast project pricing and volume discounts.
Lifetime Renew It Deck Coating
Professional-grade textured coating designed for wood decks, docks, concrete, and composite surfaces. Our Renew It formula provides waterproof protection with built-in non-slip texture.
Super thick at 1/8" thickness - fills in cracks and nails down splinters. Rock-hard textured finish created by our special blend of breathable coating and aggregate.
Available in 21 different colors or tint base for custom tinting. New formulation with added durability and wood primer for increased adhesion.
7-10 year lifespan - end your yearly ritual of stripping and repainting!
Before Coating Application
This deck had years of weathering, foot traffic, and exposure to the elements. The wood was faded, cracked, and showing significant wear.
Common problems with old decks: Splinters, uneven surface, water damage, fading, and loss of protective finish. Traditional deck stains and paints require annual maintenance and constant upkeep.
Our Renew It Coating solves these problems with a thick, durable application that fills imperfections and creates a waterproof barrier.
No extensive prep work required - our coating bonds directly to weathered wood, previous stains, and deck paints.
After Coating Application
Complete transformation! The same deck after one application of Renew It Deck Coating. The surface is now waterproofed, slip-resistant, and protected for years to come.
The textured finish provides safe footing even when wet - no sand or additives required. The coating self-levels for a uniform, professional appearance.
Paint right over previous stains and paints with our new improved formula. The added wood primer ensures maximum adhesion and longevity.
Easily applied with our textured rollers - can be brushed after rolling for a less textured finish if desired. Most decks require only one coat.
Dock & Marine Applications
Perfect for docks, boat ramps, and waterfront surfaces. Our coating withstands constant water exposure, UV radiation, and heavy marine use.
The built-in texture provides secure footing on wet surfaces - critical for safety around water. Won't peel, crack, or delaminate like traditional marine paints.
Salt water compatible: Formulated to resist salt water corrosion and marine growth. Ideal for coastal applications and freshwater environments.
Professional contractors and marinas choose Renew It for reliability and longevity. Reduces maintenance costs and extends surface life significantly.
Waterfront Durability
This dock demonstrates the superior performance of Renew It in demanding marine environments. The coating maintains its appearance and protective qualities year after year.
Breathable formula allows moisture to escape from underneath, preventing bubbling and peeling common with non-breathable coatings.
The thick 1/8" application fills in cracks and imperfections, creating a smooth, uniform surface that resists wear from boat traffic, equipment, and weather.
See the product pages for additional information. Contact us with any questions regarding the product or installation. Request A Quote for fast project pricing and volume discounts.
Renew It is a unique industrial-grade deck coating that will restore your outdoor wood deck and concrete surfaces back to better than their original new look!
Manufactured by us and shipped directly to you - not available in any stores or distributors. Applied properly to a properly prepared surface, Renew It will allow you to enjoy your deck more instead of working on your deck more.
Key Benefits:
β’ Super Durable: 1/8" thick coating that fills cracks, covers splinters, and nails down imperfections
β’ Long-Lasting: 7-10 year average lifespan when properly applied
β’ Non-Slip: Textured finish provides safe footing even when wet
β’ Temperature Resistant: Rated from -40Β°F to 200Β°F - handles extreme weather
β’ Breathable: Flexes with temperature changes - won't chip, crack, or peel
β’ Versatile: Works on wood, concrete, composite (Trex), pool decks, and more
β’ 100% Non-Toxic: Safe for landscaping, pets, and family
Surface Preparation:
Wood Surfaces:
1. Clean surface thoroughly - remove dirt, mildew, and loose material
2. Allow wood to dry completely
3. Apply Renew It Wood Primer (included with purchase)
4. Allow primer to dry before applying coating
Concrete Surfaces:
1. Clean and etch concrete with muriatic acid or concrete etching product (available at home improvement stores)
2. Rinse thoroughly and allow to dry completely
3. No primer required on concrete
Trex/Composite Decking:
1. Allow new Trex to age 3-4 months before coating
2. Clean surface thoroughly
3. Prime with Flash Bond Primer (instead of Renew It primer)
4. Allow to dry before coating
Application:
1. Use our special textured rollers for proper application (purchase 1 roller per 200 sq ft)
2. Apply coating in one direction, maintaining wet edge
3. For warped boards: roll perpendicular first, then parallel to ensure coverage in valleys
4. Apply two full coats for maximum durability and warranty coverage
5. Allow proper drying time between coats (see product label)
Application Conditions:
Temperature: Apply when temperatures will remain between 50Β°F and 100Β°F for 48 hours after application
Weather: Do not apply if rain is expected within 24 hours
Can I purchase this at a home improvement center or hardware store?
No. Our Renew It deck coating is not to be confused with retail-grade coatings available at home improvement centers. This is an industrial full-strength formulation that we manufacture and sell directly to you.
What's the difference between this and your Super Duty Deck Paint?
Paints and coatings are different. Super Deck Paint is a liquid product that leaves a thin surface film like conventional paints. Renew It starts as a solid, becomes liquid during application, then returns to a permanent 1/8" thick solid coating that bonds to the surface. This makes it far more durable than any paint.
Is this suitable for northern climates with large temperature swings and snow?
Yes! The coating has a temperature rating of -40Β°F to 200Β°F. It's extremely flexible, so temperature swings have no effect. Snow and ice won't damage it - it's tough enough to handle snow shoveling. We recommend plastic or fiberglass-tipped shovels to avoid gouging.
Can I apply this to pressure-treated wood or Trex decking?
Pressure-treated wood: Yes! Allow wood to age 6 months for complete outgassing. Renew It will restore aged, worn treated wood boards.
Trex: Yes! Age Trex 3-4 months, then prime with Flash Bond Primer (instead of Renew It primer). Great for restoring worn Trex and adding non-slip texture.
Can it be applied to untreated wood?
Yes! Renew It works best on untreated wood and provides the best long-term protection. We suggest sealing the underside of boards with a standard sealer to reduce rotting from underneath.
Can you provide custom colors?
Yes! Order the tint base version, then add up to 10 oz of universal water-based tint (available at paint stores) to create any custom color. Note: We cannot guarantee product performance beyond 1 year when custom tints are used, as some tints may affect durability.
My deck boards are warped. Can I coat them?
Yes! Roll perpendicular to boards first, then parallel to ensure material gets into valleys of warped/cupped boards. Use our 4" roller set for easier coverage. For widely spaced boards, brush smooth version between boards before applying textured coating.
Can I do the entire deck including railings?
Yes! Use our small area roller or brush for railings and posts. For a smoother finish on verticals, consider our Super Deck Paint (available in matching colors) since rails don't get the same wear as floors.
Is it slippery when wet?
No! The opposite - it has a grainy, non-slip finish that feels like very fine emery board on bare feet. Very comfortable for walking and safe for pool areas. Great for pet paws too!
Do I need to protect my landscaping?
No. It's 100% non-toxic.
Do I need special tools?
Yes. Purchase our special textured roller for proper application and best results. We suggest 1 roller for every 200 sq ft of deck.
How do I clean it?
Easy maintenance! Use mild liquid soap and garden hose. Light pressure washing is okay for heavy dirt. Can use fiberglass-edged shovel for snow removal.
How long will this last?
When properly applied (two full coats at proper thickness with our Renew It rollers), you should get an average of 7-10 years of service. After that period, apply one thin refresher coat at 150 sq ft/gal.
What is the warranty?
We offer a limited 5-year warranty against product defects when applied to a properly prepared surface in two full coats at proper thickness with our Renew It rollers.
Warranty Coverage: Covers peeling, chipping, or cracking resulting from product defects. We will replace defective material up to original quantity purchased (shipping from NJ warehouse not included).
Maximum Liability: Replacement of appropriate quantity necessary for re-coating warranted area. Warranty does not cover normal wear or shipping costs.
Important Notes:
β’ Our coating will NOT require stripping and recoating like standard deck paints or stains
β’ Cannot restore rotted, crumbling, or broken boards - replace damaged boards before coating
β’ Warranty is void when applied to unsatisfactory surface conditions
β’ Color will eventually wear and fade with sun exposure - apply refresher coat when desired
What makes this different from store-bought products?
Renew It is made from solids (not liquid paint), creating a true coating that bonds permanently to the surface. This is the same technology that makes our garage floor epoxy superior - solid-based coatings vs. liquid paints that peel off in a year or two.
