Ultra Fast Drying POLYASPARTIC Epoxy
When Downtime is Critical – Back In Service The Same Day - Apply Down to 32°F, Free Shipping!
❄
DIY EASY
No prior experience needed!
☀
UV Proof
Indoor & outdoor use
★
Coverage
250-750 SF with 2-layers
Ultra Fast vs. Standard Epoxy
Ultra Fast Polyaspartic Epoxy
- Fast professional results down to 32°
- Dries in 2-3 hours
- Heavy traffic in 24 hours
- Indoor & outdoor rated
- UV proof – won't yellow
Standard Epoxy
- Apply at 55°F+
- Dries in 12-24 hours
- Heavy traffic in 2-4 days
- Indoor use only
- UV sensitive (not outdoor rated)
Performance Features
- Chemical & acid resistant – Resistant to all vehicle fluids and Skydrol which is very corrosive
- Heavy-duty rating – 20mg abrasion loss for normal wear & tear. Light forklift traffic rated
- Multi-surface – Works on concrete, wood, or stone
- Low odor – About the same as conventional interior paints
Coverage - Application Details - TDS & SDS
Coverage: Sold as a 2-gallon set, 250 square feet of coverage with two coats; a 4-gallon set covers 500 square feet with two coats; or a 6-gallon set covers750 square feet with two coats. Allow yourself at least a 10% safety factor for different floor porosities—every concrete floor is different.
Pot Life: Approximately 10-15 minutes. We recommend not mixing more than 1 gallon at a time. Start with 1/2 gallon for your first batch until you get familiar working with it.
Color Flake Finish Option
For a decorative color flake finish, choose one of our color flake packs. Instead of all pigmented epoxy, you will receive:
- half the epoxy in the color you selected (base coat)
- half the epoxy in clear as a topcoat over flakes
- 3 lbs, 6lbs or 9lbs of color flakes for the 250, 500 or 750 SF kits respectively
This creates a finish similar to our Armor Chip Garage Epoxy kit but can be applied directly outdoors and during cold winter months.
What's Included In Your Kit
Everything needed to complete your floor in one day — no extra trips to the store.
Do It Right the First Time With ArmorGarage!
Need guidance or volume pricing for your project? Get expert support from start to finish.
Talk To An Expert
This Polyaspartic epoxy coating is rated from Residential to Commercial usage. The list of applications is long and wide-ranging.
Typical Applications
Outdoor Carports
& Patios
Outdoor Commercial
Public Spaces
Commercial Applications
Where Downtime is Critical
Light Aircraft
Hangars
Where Caustic Chemical
Resistance is Required
Loading Docks
Application Instructions
Follow each step carefully for best results. We recommend starting with a small test batch first.
Surface Preparation
Concrete slab must be clean of all dust, dirt, oil stains, and any other contaminants. We recommend a double etching if concrete is new or extra dirty. The Floor Prep Machine from Home Depot provides excellent results. After grinding, vacuum the floor to remove leftover dust, then use a strong leaf blower to blow any remaining dust off the floor and out of the premises.
Repair any cracks or divots prior to coating. Coatings will not repair floor damage. Use the ArmorGarage Instant Crack Repair, it lets you patch and coat right over it without having to wait for it to cure like standard patch compounds.
Mixing the Coating
Stir each can with separate stir sticks to unify any separated materials. Pour all the Tint (1 pint) into the Part A and mix until color is uniform. Pour Part A into a clear measuring container, do the same with Part B in a separate container.
Mix one gallon total of Part A & Part B at a time per the mix ratio on the label. You can use any measuring cups for smaller amounts as long as you maintain the proper ratios. Make sure to mix all material from the sides and bottom of your container so you don’t end up with any unmixed material. Do not over-stir or create a vortex that will induce air into the mixture. Mix for 2 minutes and pour directly onto concret in a bead, this will slow the curing process and allow more working time.
Apply the Base Coat
Pour mixed coating onto the floor in a left-to-right bead and spread out with a 1/4" nap epoxy lint-free roller. Apply at approximately 250 sq ft per mixed gallon. Do not mix more than 1 gallon at a time per person rolling.
Base coat quick specs
Spread Rate: ~250 sq ft per mixed gallon
Roller: 1/4" nap, epoxy lint-free (supplied with kit)
Max Mix per Person: 1 gallon at a time
Working Time: 15–20 minutes once mixed
Broadcast Color Flakes
Once epoxy is rolled out, put on your spike soles and broadcast color flakes into the wet epoxy. For best results, use a plastic-handled jug with 3/8" holes drilled into the bottom and shake the flakes out in an even but random pattern. An alternate method is to toss handfuls of flakes at a 45-degree angle up and away from you as you walk around.
Once dry, scrape the flakes with any type of flat-edge tool to knock down any standing chips, then vacuum up the debris.
Apply the Clear Topcoat
Apply the second coat (clear coat) in the same way as the first coat, perpendicular to the first coat if possible. Avoid puddling and over-rolling for best results. Spread rate is approximately 250 sq ft/gal. You will get better coverage on the second coat since the floor is now sealed, and all streakiness will be eliminated.
Non-Slip Additive (Recommended)
For a skid-resistant surface, mix the supplied non-slip additive into the clear coat in the appropriate ratio to the amount of epoxy you have mixed. Make sure to mix this in thoroughly before applying, and re-mix when pouring more epoxy into the roller pan to keep the non-slip particles suspended.
Related Products
