Marine 590 Epoxy Coating For Steel

Marine 590X Epoxy Coating

(No reviews yet) Write a Review

$220.00

Availability:

Usually ships out in 1 business days

Description
TDS - SDS

Marine-590X Wet Surface & Underwater Epoxy

Two-part epoxy coating for steel and concrete in marine and wet environments. Applies to wet surfaces, underwater, and even in the rain — with zero downtime required.

Saltwater Resistant • Applies Underwater • Zero Odor • VOC Compliant

Applies Underwater Zero Downtime Required Self-Priming VOC Compliant

◗

Applies Underwater

Adheres to wet surfaces and can be applied fully submerged. Apply in the rain while staying in full operation.

⚖

Saltwater & Chemical Resistant

Highly resistant to saltwater, impact, and abrasion. Built for the harshest marine and industrial exposure.

★

Self-Priming

No primer needed. Adheres directly to bare steel, tight rust, concrete, and previously coated surfaces.

⚡

Zero Downtime

Apply while equipment stays in service. Perfect for facilities that cannot shut down for maintenance coating.

✔

Zero Odor & Nontoxic

Safe for occupied areas. No fumes, no odor. Meets all VOC laws. Not water-based.

⚙

Stays Flexible

Remains flexible after cure. Ideal for surfaces with deflection, vibration, or thermal expansion.

■

Impact & Abrasion Resistant

Withstands heavy mechanical abuse, impacts, and constant wear in demanding environments.

❄

Indoor & Outdoor

Primarily designed for outdoor marine exposure but equally effective for indoor applications.

Why Marine-590X Is Different

Most coatings require dry surfaces, downtime, and perfect conditions. Marine-590X doesn’t. This two-part epoxy bonds to wet surfaces, underwater substrates, and even surfaces with tight rust — so you can coat piping, tanks, structural steel, and marine equipment without waiting for a dry window or shutting down operations.

The coating remains flexible after cure, making it ideal for surfaces that experience deflection, vibration, or thermal movement. Zero odor and completely nontoxic, so it can be applied in occupied, enclosed, and poorly ventilated spaces without disruption.

Surface compatibility: Bare steel, tight rust, concrete, masonry, and previously coated surfaces (tight, non-flaking coatings). Self-priming — no separate primer needed.

Common Applications

Piping & Ductwork Valves & Pumps Storage Tanks Structural Steel Fences & Railings Safety Ladders Manhole Covers Ship Interiors Hatchways & Bulkheads Engine Compartments Below Interior Waterline Buildings & Facades

Note: Suitable for ship interiors including below the interior waterline. Not intended for exterior hull duty.

Application at a Glance

Specification	Detail
Mix ratio	Part A + Part B, mix with drill-mounted Jiffy mixer
Application method	Brush, roll, or spray
Working time	20–30 minutes after mixing
Coverage rate	230–250 sf/gal (recommended)
Finish	Medium gloss
Coats — bare surfaces	2 coats recommended for maximum protection
Coats — previously coated	1 coat usually sufficient
Surface prep	Remove loose rust, paint, or dirt. Adheres to tight rust.