Indoor & Outdoor Textured Rubber Epoxy Coating
Ships Free!
ArmorTrak is an industrial rubberized epoxy that's totally flexible, slip-resistant and 100% waterproof. ArmorTrak is not just regular paint, it's a liquefied polyurethane membrane with proprietary self-contained dehydrated rubber granules that forms a unique rubber epoxy floor coating that is aesthetically pleasing, textured, slip resistant and super durable. ArmorTrak rubberized epoxy will chemically and permanently bond to most clean and dry surfaces. These include, but are not limited to, concrete, wood, fiberglass, metal, rubber, ceramic tiles, porcelain tiles. making it perfect for locker rooms, commercial kitchens, ramps, stairs, pool decks and many other applications. ArmorTrak rubberized epoxy can be applied with our specialized ArmotTrak roller(supplied with each order) or by brush for virtually any application where a slip resistant and impact resistant coating is needed. We recommend that ArmorTrak be used where foot traffic, pallet jacks, dollies and carts are the main traffic source. Not recommended for vehicle or forklift traffic. Also use in areas where high chemical resistance is required and caustic wash downs are done.
USES:
ArmorTrak rubberized epoxy has many applications for commercial and residential use. Armortrak protects surfaces from foul weather elements and harsh chemicals, great for floors where an anti slip high wear surface is required such as pool decks, balconies, high traffic pedestrian walkways, ramps, pedestrian bridges, wooden steps, catwalks and many marine applications such as docks and boat decks.
The ArmorTrack rubberized epoxy offers more flexibility, a much more durable, slip resistant surface and a better appearance. If applying over tiles you must use the Bonding Primer. If applying as a roof deck you must apply two coats of the waterproof base coat first. ArmorTrak is not intended as a roofing product on its own.
ArmorTrak has a continuous duty temperature rating of 250 degrees! It is unaffected by extreme temperatures and will not peel or chip up. It will not yellow or fade either. It has extreme bonding capabilities and cannot be removed from concrete, tiles, rubber or wood by any means other than mechanical grinding. Is extremely wear resistant and can handle almost unlimited amounts of foot traffic. If and when coating eventually shows sign of wear it can easily be coated over itself with just a single coat. Can easily be repaired by simply applying more material over damaged area. ArmorTrak reactivates itself and bonds to the previous coating.
ArmorTrak rubberized epoxy has proven to be a great choice for commercial kitchen floors that are subject to oil & grease spills and impacts from dropped pots, pans and dishes. Covers over Terracotta Tiles(prime first with ArmorTrak Primer), provides a nonslip stain resistant and high impact resistant floor!
ADVANTAGES:
Foot traffic in 6 to 12 hours, Economical, Lasts for years; no need to remove old product when recoating- Weight per gallon, 10 lbs, Percent solids by weight 75.8%
One-Part No mixing of components, Totally Flexible, Never chips, flakes or peels, Repairable, Bonds to itself, waterproof. Resistant to acid, chemicals, UV exposure, salt water, Fast Drying, Short recoat time-4-5 hours.
COLORS:
Armortrak rubberized epoxy comes in standard and custom colors, including Black, Dark Grey, Light Grey, Fire Engine Red, Brick Red, Dark Blue, Medium Blue, Forest Green, Avocado Green, Safety Yellow, Orange, White, Tan, Cream and Beige.
DUE TO THE HIGH DEMAND FOR THIS PRODUCT PLEASE ALLOW 4-5 DAYS LEAD TIME FOR SHIPMENT OF ARMORTRAK
Minimum order amount is 125-150 sf. Orders must be in 75 sf increments such as 150, 225, 300, 375 sf. Coverage is calculated at two coats at 150 sf/gal. Price per square foot includes enough product for two coats and ArmorTrak textured rollers. Coverage may vary according to surface conditions, application and lighter colors such as white, cream or beige may yield slightly less coverage. This product is not returnable.
FArmorTrak can be used for literally hundreds of applications on anything or anywhere a flexible textured coating is required, indoors or outdoors. For vehicle traffic we strongly recommend using black to hide tire marks.
APPLICATION:
ArmorTrak is sold as a per square foot product to ensure you have enough material to complete your project properly.</p><p>
For all surfaces other than concrete, wood and previously coated surfaces, Bonding Primer must be used first. Wood and previously coated surfaces should be rough sanded clean, concrete surfaces, ceramic and porcelain tiles should be acid etched with muriatic acid in a 3 parts water to 1 part acid ratio and then neutralized with TSP at 1lb/1000 sf. In general all surfaces must be clean and dry prior to application of the ArmorTrak Coating.</p><p>
Once surface is clean and dry, application is simple. If using the Bonding Primer, stir contents in can till uniform in color. Apply with lint free 3/8” nap roller and let dry overnight. Coverage of primer is 400 sf/gal.
Mix ArmorTrak in can with jiffy mixer in electric drill on medium speed to suspend rubber granules, do not shake can to stir. Apply ArmorTrak first coat with supplied ArmorTrak roller. First coat should go on thin to cover surface. Allow first coat to dry to the touch usually 3-4 hrs. Apply the second coat perpendicular to first coat if possible with the textured ArmorTrak roller. Second coat will get better coverage and should even out the look. ArmorTrak can be applied by brush where coating with roller is not feasible.
Allow to dry overnight prior to foot traffic. ArmorTrak should be allowed to dry for 24hrs before light traffic. Once ArmorTrak has fully cured in 48 hrs it is as tough as nails and will provide many years of service.
PLEASE NOTE THAT THE MINIMUM ORDER SIZE 150 SF AND THEN IN 75 SF INCREMENTS. ORDERS FOR LESS THAN 150 SF WILL NOT BE PROCESSED.
• Application temperature range 39 F to 95 F
• Application thickness, 2 coats dry 35-40 Mils
• Flexibility: Total flexibility, for crack free finish.
• Abrasion resistance: Tabor wheel, 1000 gr load, 1000 cycles 30.5mg
• Adhesion: 575 PSI! Concrete surface fails prior to coating separation. Coating cannot be separated from concrete surface.
• Salt water resistance 100%
• Cold-Heat temperature range: -60 F to +254 F.
• Working time: 2 hours, Walk time 12 to 24 hours
• Time between coats aprox 5-6 hour, Full strength 48 hrs.
• VOC 2.08 lbs/gal
Pool Decks
Ramps
Stairs & Ladder Steps
Wet Floor Environments
Wood Floors
Metal Deck Floors
Boats
Coating Porcelain, Ceramic or Terracotta Tiles
Outdoor or Indooor Concrete
Asphalt
Rubber Surfaces
Fiberglass
Plastic Surfaces
Aluminum and other nonferous metals
All Anti Slip Applications
