Military Grade Clear Floor Topcoat
A clear, ultra-tough floor topcoat with a 4 mg abrasion loss rating — far better than the 30 mg+ of retail topcoats — adding scratch, abrasion, stain, and chemical resistance in a single coat.
What is the clear topcoat?
This clear topcoat is as tough as it gets. It has excellent scratch, abrasion, stain and chemical resistance. Goes on in one coat at 400-600 Sq Ft/Gal. Has an abrasion loss rating of 4mg (the lower the number the better) compared to retail topcoats that are 30mgs and higher!
How do you apply it?
If going over an existing coating or topcoat you must rough the surface up with 100 grit to ensure a proper bond.
Using the supplied non-slip additive
If using the supplied nonslip, mix it into the can and stir to suspend particles and stir frequently to avoid the particles settling. Use a roller pan and roller. Pouring the coating with nonslip directly onto the floor will result in dull spots.
Questions about your project? Call 866-532-3979 or email info@armorgarage.com — full unlimited phone & email support.
Related Products
Commercial Grade Two Part Topcoat
EPOXY CHIPS & TOPCOAT
