Waterproof Epoxy Floor Coating For Continuously Wet Floors
The only industrial epoxy engineered for floors that never dry — car washes, meat packing, seafood processing, chemical plants, and marine environments. Standard epoxy fails in months. This one is built to last.
Why Standard Epoxy Fails in Wet Environments
Car washes, meat packing, seafood and poultry processing floors are constantly wet and constantly washed down with hot caustic chemicals. This destroys any standard floor epoxy no matter how strong it is. Using the wrong product here isn't just a waste of money — it creates unsanitary conditions and expensive downtime when the coating fails and must be fully removed.
Here's what happens: tiny fissures form in the epoxy surface over time from constant hot washdowns, cleaning chemicals, food oils, and blood. Moisture gets into those fissures and works its way down to the concrete. Once it hits the slab it creates efflorescence — and bacteria — which pushes back up through the epoxy, causing complete coating failure.
You must use an epoxy specifically designed for continuous wet and caustic environments. ArmorGarage Wet Processing Epoxy is formulated to solve this exact problem — standard products are not engineered for this and will fail.
Applies directly to wet floors — a massive advantage in processing environments where getting the floor completely dry requires significant downtime. This coating bonds to damp and wet concrete, eliminating the drying wait entirely.
Performance Features
Ideal Applications
Also works great in troughs, concrete or steel basins, and on ferrous machinery — wherever continuous moisture and chemical exposure destroys standard coatings.
Coverage & Specifications
- Two coats required for full 16 mil thickness at standard 200 sf/gal spread rate
- Adjustable thickness — apply anywhere between 80 sf/gal (40 mils) and 200 sf/gal (16 mils) per your project requirements
- Light traffic in 12 hours, full service in 24 hours
- Available colors: Bright White, Light Gray, Medium Gray, Dark Gray. 4-gallon sets available for orders of 30 gallons or more
- Can be applied over existing coatings that are sanded clean and roughed up
Non-Slip Finish Options
Option 1 — Non-Slip Additive
Mix our Heavy-Duty Non-Slip additive directly into the epoxy second coat before application. Easiest method — no extra steps.
Option 2 — Broadcast Sand
Broadcast coarse sand to rejection into the first coat. Let dry, sweep up all loose sand, then apply the second coat. Note: coverage on second coat may be slightly reduced — order a little extra to be safe.
Cove Base Option
Add our Cove Base kits to create a seamless radiused floor-to-wall transition. The epoxy coats across the floor and up the wall, forming a completely waterproof tub for easy pressure washing. This eliminates the 90-degree floor/wall angle where bacteria and contaminants accumulate — essential for code-compliant food processing and washdown environments.
Easy DIY application — applied with roller or brush by in-house maintenance staff. No experience needed for professional results. No contractor required.
For dry floor applications in food and beverage facilities — see our Commercial Kitchen & Food Processing Epoxy System.
Volume Discounts Available
4-gallon sets available for orders of 30 gallons or more. Submit a quote request for discounted pricing.
Clean floor by eithr diamond grind or muriatic acid wash to remove any oils or grease from floor. Rinse floor clean, floor can be wet during product application.
Mix at a 3:1 ratio and pour in a bead from left to right and apply with phenolic core roller. Pot life is 30 minutes. This is not a water based product Do Not mix more than can be applied in about 20 minutes.
Allow first coat to dry in about 4-5 hours till dry to the touch. First coat must be tack free before applying second coat. Apply second coat in perpendicular direction to first coat if possible. If nonslip is being used mix in one pint per gallon after Part A & Part B has been mixed. Keep mixing while applying to keep nonslip from settling to the bottom. Use a roller pan if using nonslip. Finish may have slightly uneven gloss depending on application. This is simply a cosmetic issue and will not effect performance of the product. Product should be left to dry overnight and can be back in full service the next day.
