Cove Base Epoxy Kit

COVE BASE EPOXY KIT

(No reviews yet) Write a Review

$198.00

Description
TDS-Instructions & SDS

Epoxy Cove Base Kit

Form an indestructible, waterproof cove base around the perimeter of your floor. Creates a seamless transition from floor to wall — required by Health Departments for all food processing and handling areas.

Health Code Compliant • Waterproof • Easy DIY Install

Health Dept Required Waterproof Tub System Seamless Floor-to-Wall Prevents Contamination Easy to Apply 4" Cove Tool Included

◗

Waterproof Tub

Run your epoxy across the floor and up the cove base, forming a continuous waterproof seal for power washdowns.

✔

Health Code Compliant

Required by all Health Departments in food processing and handling areas. Inspectors love a properly installed cove base.

⚙

Easy DIY Install

Simply mix all components and apply with the included cove tool at your desired height. No experience needed.

⚖

Prevents Contamination

Eliminates the 90° wall-floor juncture where bacteria and contaminants collect. Creates a sanitary radiused joint.

How It Works

ArmorGarage lets you form your own cove base with our epoxy cove base kit. Contains all the material needed to form an indestructible cove base around the perimeter of your commercial kitchen and food processing floors. This allows you to run your epoxy coating across the floor and up the cove base material, forming a waterproof tub.

In addition to the waterproofing feature, the cove base provides a seamless transition from wall to floor, preventing contamination from forming in the 90° juncture — a requirement from all Health Departments in food processing and handling areas.

Commercial kitchen epoxy being applied over epoxy cove base - seamless floor to wall transition

Cove base installed with cove tool, then coated with Commercial Kitchen Epoxy — diamond grinded floor with epoxy applied across floor and up the cove base

Coverage & Application

30 LF

Per Kit (4" Cove)

175 LF

Per Kit as Primer

Cove Tool Included

Easy to apply: Simply mix all components of each kit and apply with the cove tool at the desired height.

Pro Tip — Order an extra kit for priming: We recommend purchasing one additional kit to use the liquids only as a primer on the wall. This increases the adhesion of the cove mortar immensely. Just mix the liquids (don’t mix in the aggregate), apply to the wall, and let sit for about 10 minutes. This creates a sticky surface for the cove base material to stick to. One kit used as primer should cover approximately 175 lineal feet.