Extra Heavy Duty Data Center Epoxy Flooring
This is a specially formulated two layer epoxy coating system consisting of our high performance primer and a chemically extra hardened epoxy topcoat designed to be impervious to heavy foot traffic, heavy Dolley traffic, repetitive wear traffic, found in data centers. These floors see high foot traffic and wheel traffic that can quickly dull and wear out standard epoxy floor coatings. This coating is waterproof, mold & mildew proof, seamless, and has a Teflon like finish that is very stain and chemical resistant. High gloss finish brightens your server rooms and is super easy to keep clean since it's very non-stick.
This epoxy has a hardness rating of Shore D 90+, that is harder than construction hard hats plus it is 30 mils thick. The combination of extra hard surface and extra thickness ensures your floor's high-gloss finish stays looking new the longest versus only looking good for the first six months.
We tested this coating with our forklifts in our warehouse; we drove the forklifts around with the forks tilted down onto the floor and they had no effect on the coating! This is the kind of toughness you want in your data centers so you don't have to worry about recoating them for a very very long time.
Sold in 4 gallon sets of primer and epoxy topcoat. Coverage is 300-350 sf depending on surface conditions.
Application is very easy. Floor must be clean, dry and profiled either by acid etching or diamond grinding. Once floor is clean and dry, mix primer in a 1:1 ratio and roll out like regular paint. Let dry 5-8 hours depending on temperature. Do not let more than 24 hours pass before applying epoxy. Primer is ready for epoxy when you can press your thumb into it without leaving a fingerprint.
Next mix epoxy in a 2:1 ratio, only mix 1 gallon of epoxy per person rolling. Mix for 2 1/2 minutes and pour directly onto floor in a bead from left to right. Spread out with supplied squeegee and then back-roll to even out and spread further with lint free roller. If using nonslip additive, disperse onto epoxy during back-rolling. Use 1.5 units of nonslip per 3 gallons of epoxy for best results.
Allow epoxy to dry overnight. Light-medium traffic next day, heavy traffic on second day.
