Military Grade Topcoat

This clear topcoat is as tough as it gets. It has excellent scratch, abrasion, stain and chemical resistance. Goes on in one coat at 400-600 Sq Ft/Gal. Has an abrasion loss rating of 4mg (the lower the number the better) compared to retail topcoats that are 30mgs and higher! Do not apply thicker than 400 sf/gal to avoid bubbling. If going over an existing coating or topcoat you must rough the surface up with 100 grit to ensure a proper bond. If using the supplied nonslip, mix it into the can and stir to suspend particles and stir frequently to avoid the particles settling. Use a roller pan and roller. Pouring the coating with nonslip directly onto the floor will result in dull spots.