Product Features

No Prior Experience Needed

Chemical-Impact Resistant

Longest Lasting

Free Shipping

EPOXY COATING FOR STEEL PIPE & METAL EQUIPMENT

(No reviews yet) Write a Review
$155.00
Availability:
Usually ships out in 2 business days
Total Price:
(Unit Price = )
Adding to cart… The item has been added

Heavy-Duty Epoxy Coating for Steel & Iron Surfaces

Extra-thick two-part mastic for direct application to steel and iron—no primer, no sandblasting, no extensive prep required

FREE SHIPPING ON ORDERS OVER $300
No Primer Required
5× Thicker Than Standard
USDA & FDA Approved
Indoor & Outdoor Use

Industrial-Grade Direct-to-Metal Epoxy

ArmorGarage two-part direct-to-metal epoxy is an extra-thick mastic designed for application directly to steel surfaces without primer. At 20 mils per coat, it's five times thicker than typical metal paints, water-based coatings, and one-part epoxy products.

Engineered for all industrial applications: process and HVAC piping, mechanical equipment, catwalks, steel stairways, iron rails, industrial machines, enclosures, and infrastructure.

Extra-Thick Mastic Formula

One-coat coverage at 20 mils thick—encapsulates sharp edges and covers surface irregularities.

Best Safety Colors In Stock

Our safety colors are made with our proprietary factory ground pigment powders as opposed to liquid tints. True color coverage in one coat as opposed to multiple coats with liquid tinted coatings. Saving time & material.

Minimal Surface Prep

Wire brush loose rust, wipe clean, and apply—no sandblasting or grinding required

Cost-Effective Solution

Reduces ownership costs by eliminating constant recoating and extensive prep work

Outperforms Standard Metal Coatings

ArmorGarage Metal Epoxy significantly outperforms all acrylic, water-based, and one-part metal epoxies. Standard residential-grade products simply don't last, regardless of advertised guarantees.

If your facility routinely experiences coating wear on equipment, piping, and metal surfaces, this is your solution. Traditional one-part coatings prone to peeling and chipping require previous coatings and rust to be sandblasted or ground off, then primed—a time-consuming and costly process.

The ArmorGarage Advantage: Wire brush loose rust, paint over it, and apply our coating.  Ideal for applications where extensive prep isn't feasible or plant shutdown time is limited.

Safety Color advantage, our factory ground pigment powders provide the highest quality colors requiring only one coat for complete coverage with no bleed through. Typical coatings are liquid tinted which in high pigment safety colors yield much less covergae and suffer from high bleed through rates requiring multiple coats.

What Our Customers Say

Montell Fabrication & Rebuild LLC

Five star customer testimonial from Montell Fabrication for epoxy coating quality and reliability

Superior Durability & Performance

Excellent durability and color retention in the harshest industrial environments. While other epoxies require extensive prep and pristine surfaces to adhere properly, ArmorGarage Epoxy Mastic adheres to minimally prepped surfaces with tight rust while delivering a high-level finish with superior longevity.

High Impact & Heat Resistant

Service temperatures up to 170°F (standard) or 225°F (fast cure low temp version)

Indoor & Outdoor Applications

Suitable for all environments throughout industrial facilities and food processing plants

Chemical & Acid Resistant

Ideal as outer tank coating and for metal in corrosive environments

USDA & FDA Approved

Certified for food processing plants and facilities requiring regulatory compliance

For inner tank coating applications, see our Underground Pipe & Industrial Tank Coating.

Industrial conveyor system with Y-shaped chute coated with ArmorGarage metal epoxy

Built for the Toughest Outdoor Environments

For outdoor applications, order the protective topcoat option for enhanced UV and weather resistance. Keeps color retention and surface integrity intact through years of sun, rain, and temperature swings.

Colorful oilfield wellheads coated with ArmorGarage industrial metal epoxy

Easy Application — Professional Results

Simple two-part epoxy that can be applied by in-house maintenance staff or painting contractors. No special skills or extensive surface prep required.

  • Brush, Roll, or Spray: Apply with whatever method suits your job best
  • 20 Mils Per Coat: Engineered for extra-long service life—standard metal coatings at 2 mils can't compete
  • Eliminates Repetitive Painting: The long-term solution for mechanical equipment, process piping, ductwork, tanks, and steel supporting members
  • All Standard Colors: Available in all industrial and safety colors with custom color matching for orders of 50 gallons or more

Temperature Options

Standard Version: Service application temperature up to 170°F. Ideal for most indoor industrial environments.

Fast Cure Low Temp Version: Can be applied in temperatures as low as 32°F with service temperatures as high as 225°F—ideal for cold-weather applications or high-heat environments.

Get a Quote for Your Project

Whether you're coating a few pieces of equipment or an entire facility's worth of piping and infrastructure, we can provide volume pricing tailored to your project scope.

Ready to Get Started? Talk to an expert at 866-532-3979 — info@armorgarage.com or Request a Quote for pricing and volume discounts on larger projects.

Metallic Color Chart

Approximately 220sf/gal. Coverage is dependent on application and surface condition. Do not apply below 45 degrees. For applications below 45 degrees order the Low Temp Version. For high surface temp applications up to 220 degrees order the Low Temp Version also.

Can be rolled, brushed or sprayed. This product is very thick unlike standard epoxies, we recommend applying as is but can be thinned if needed with a few ounces of MEK to desired viscosity. Do not add more than 5 ozs of MEK per mixed gallon. Mix per label instructions and apply. Steel surfaces should have all loose rust or loose existing coatings removed. Mix in a 4:1 ratio, has pot life of 1-2 hrs depending on temperature and humidity. Cures in 6-8 hrs. Recommended for indoor applications. Outdoor applications must use the topcoat. When using topcoat one base coat is all that is needed, allow base coat to fully cure before applying topcoat. Topcoat can be applied by airless sprayer, roller or brush at an aproximate spread rate of 300 sf/gal. 

DOWNLOAD - TDS

DOWNLOAD - SDS

Custom tab 1

Metallic Color Chart

Custom tab 2

Approximately 220sf/gal. Coverage is dependent on application and surface condition. Do not apply below 45 degrees. For applications below 45 degrees order the Low Temp Version. For high surface temp applications up to 220 degrees order the Low Temp Version also.

Custom tab 3

Can be rolled, brushed or sprayed. This product is very thick unlike standard epoxies, we recommend applying as is but can be thinned if needed with a few ounces of MEK to desired viscosity. Do not add more than 5 ozs of MEK per mixed gallon. Mix per label instructions and apply. Steel surfaces should have all loose rust or loose existing coatings removed. Mix in a 4:1 ratio, has pot life of 1-2 hrs depending on temperature and humidity. Cures in 6-8 hrs. Recommended for indoor applications. Outdoor applications must use the topcoat. When using topcoat one base coat is all that is needed, allow base coat to fully cure before applying topcoat. Topcoat can be applied by airless sprayer, roller or brush at an aproximate spread rate of 300 sf/gal. 

DOWNLOAD - TDS

DOWNLOAD - SDS

Custom tab 4

Custom tab 5

×
Zoomed Variant Image

FAQs

Related Products

!