Roof Coatings

Roof Coatings for Any Roof Type

ArmorGarage Roof Shield is a high-performance epoxy rubber roof coating for flat or pitched roofs that outperforms traditional elastomeric coatings, tar, EPDM roofing materials, liquid EPDM, and water- or silicone-based coatings.

Finding and repairing roof leaks is more often than not an expensive, futile effort that ends up costing far more than had you encapsulated your entire roof with an ArmorGarage coating from the start. Once fully coated, it's impossible for water to penetrate.

Why Our Roof Coatings Outperform the Competition

Look at the difference in thickness between our coating and typical roof coatings. That's the image below—and it tells the whole story. Our coating is made with the highest grade of rubber fortified with military-grade epoxy. Applying ArmorGarage is like installing a new roof that outperforms your original roofing material.

When you start with a thin coating that has a chemical structure with wide pores, it doesn't take much for water to pass right through. ArmorGarage roof coatings have the lowest permeability ratings—meaning the tightest chemical structure with the smallest pores—resulting in superior leak-stopping and prevention capabilities.

Asphalt Flat Roof Coating

Our Tar and Rubber Roof Coating is perfect for flat or pitched roofs. Applied in two coats at 100 sf/gal, it's an industrial-grade coating engineered to last 15–20 years. With superior stretch and memory retention, the lowest permeability rating, and hail-resistant toughness, this is the best commercial roof coating on the market.

Can be rolled or sprayed on by anyone. Let one of our roofing experts evaluate your roof and provide you with a detailed quote. Volume discounts available.

Metal Roof Coating: Before & After

This roof was a total disaster, along with the rooftop ductwork. The building leaked like a sieve and looked like everything needed to be replaced. But one coat of our zinc primer and two coats of the Metal Roof Coating made the roof look brand new.

The ductwork was saved with one coat of our heavy-duty metal epoxy mastic and the protective topcoat. Not only are they leak-free now, but the interior temperature dropped by a whopping 10 degrees during summer months.

They were using a popular silicone roof coating until they got tired of its underperformance and useless warranty. After switching to ArmorGarage, they couldn't be happier—and we matched the coating to their custom color so the roofs blended into the background rather than appearing bright white.

Asphalt Shingle Roof Coating

ArmorGarage asphalt shingle roof coating is one of the best-selling and best-performing coatings you can apply to your shingled roof. Many popular coatings don't allow your shingles to breathe, risking rot damage to your beams and boards. They also get burned off quickly from intense sun exposure, leaving shingles unprotected.

• Locks Down Granules: Once shingles lose their granules, it's too late—this coating preserves them
• Stops Leaks: Seals and protects aging shingles from water penetration
• Rejuvenates Color: Restores faded shingle appearance
• Extends Roof Life 5–7+ Years: Delays costly full replacement
• Easy to Apply: Roll on or use a simple garden hand pump sprayer

Ponding Water Roof Coating

Flat roofs are notorious for low spots where water accumulates and sits for two or more days. It's extremely destructive to any asphalt-based roof, including torch-down and built-up systems. Low areas accumulate silt and debris when standing water finally evaporates.

See the Ponding Roof Coating product page for detailed examples of silt buildup and application instructions.

The Real Cost of Temporary Roof Fixes

Patching leaks with cheap, low-quality products creates an expensive cycle: the leaks stop temporarily, then return. You repair again and again until you're facing complete roof replacement—having spent a fortune on "inexpensive" products that created a bigger problem than you started with.

ArmorGarage Roof Coating stops leaks with one application and keeps you dry for a minimum of 15 years guaranteed, with an average lifespan of 20 years. That delivers one of the lowest costs of ownership in the industry—product cost divided by years of actual service.

Why Armor Roof Shield Outperforms Every Competitor

Armor Roof Shield contains zero water content and maintains a failure-free track record since its introduction. The difference is immediately visible: our coating offers tremendous thickness compared to popular water-based brands that lose over half their volume to water evaporation during curing. Using ArmorGarage is like adding another layer of roofing material—while other brands simply paint your roof with a thin film.

Superior Materials & Proven Technology

Since 1988, we've helped customers who couldn't find a product that was easy to apply, guaranteed long-term durability, and cost less than roof replacement. Armor Roof Shield combines our extensive epoxy technology with a copolymer butyl rubber base—the highest grade available and far superior to EPDM alternatives.

Talk to a Roofing Expert

Not sure which coating is right for your roof? Contact us with pictures and videos of your roof for expert advice on which product to use and how best to apply it. We have many years of field experience with roof projects of every size.