Urethane Epoxy Cement Slurry
1/8" to 1/4" thick industrial flooring system — The M1 Abrams Tank of floor coatings
When You Need A Thicker Floor Than Paint Can Provide
ArmorGarage Urethane Epoxy Cement Slurry is an extra-thick specialized three-component system (epoxy liquids Part A & B plus aggregate) designed for food industry applications where stricter codes or industrial specifications require a minimum 1/8" thickness. Faster, Easier To Apply & Less Expensive Than Quartz Floors! No special skills required.
A non-slip, high-gloss, super abrasion-resistant flooring system that endures high impacts, extreme thermal shocks from hot water, steam, and oils. Highly moisture-tolerant, making it ideal for wet and damp areas—can even be applied to damp concrete.
"The M1 Abrams Tank of Flooring" — Among the most advanced coatings available for the food and beverage industry due to its virtual indestructibility.
Ideal Applications
Food & Beverage Facilities
Kitchens, bakeries, food processing plants, breweries, bottling plants
Industrial Environments
Chemical processing plants, wastewater treatment facilities, heavy forklift traffic areas
Sanitizing & Wash Areas
Locations requiring durable, shock and impact-resistant surfaces with constant moisture
Code Compliance
Meets city and state health department requirements for minimum 1/8" thickness flooring
Use this when standard epoxy coatings don't meet thickness requirements. Can be applied from 1/8" up to 1/4" thick!
Simple Installation Process
No prior experience needed! Easy DIY installation with basic tools:
Step 1: Mix liquids A & B with proprietary silica powder using a power mixing tool (compatible with standard drill)
Step 2: Pour onto floor and spread with adjustable Cam Rake at desired thickness (available at Grainger and other stores)
Step 3: Backroll with spike roller (also available at Grainger) to release trapped air bubbles
Curing time: 10-18 hours depending on temperature, humidity, and application thickness. Light foot traffic in 12 hours.
Tools not included: Power mixing tool, Cam Rake, spike roller, spike soles (strongly recommended). See Related Products section for accessories, topcoats and non-slip additive.
Watch how easily it spreads with gauge rake and pin roller
Recommended Finish System
For optimal performance and texture, we recommend:
1. Full Broadcast: Apply full broadcast of sand or heavy aluminum oxide to provide textured non-slip finish
2. Topcoat Options:
- Commercial Grade Two-Part Topcoat: Standard applications
- Chemical & Acid-Resistant Topcoat: Areas with caustic washdowns
Example: Below is urethane cement with full broadcast sand and commercial two-part topcoat in Safety Yellow around a brewery trench drain. Unlike trowelled quartz systems that need expensive expert installation and multiple coats of "Sealant" with non-slip additive that wears out needing reapplication of Sealant and non-slip additive ArmorGarage's system provides a permanent nonslip finish.
Coverage & Technical Specifications
COVERAGE
@ 1/8" thickness per 50-lb kit
THICKNESS
Self-leveling application
STRENGTH
2x stronger than concrete
Self-leveling and easy to install—excellent choice for resurfacing or coating damaged, pocked, and spalled floors. Cannot be compared to commercial-grade leveling slurries that fail under high traffic.
Available colors: Medium Gray, Tan, or Tile Red. Can be topcoated with ArmorGarage Military Grade Protective Topcoat to achieve any standard or custom color (minimums may apply).
Important: Proper adhesion requires shot blasting or rough diamond grinding for surface preparation.
Additional Performance Benefits
- Chemical Resistance: Resistant to harsh chemicals including acids, alkalis, and aggressive cleaning agents—suitable for the most challenging environments
- Enhanced Slip Resistance: Superior traction when aggregates are broadcast within the system
- Low Odor & Low VOC: Suitable for use in areas with limited ventilation or where air quality is crucial
- Fast Return to Service: Floor can be returned to light foot traffic within 12 hours—convenient for businesses that can't afford long downtime
- Extreme Impact Resistance: Hammer impact resistant, suitable where heavy objects may fall onto the floor—as bulletproof as flooring gets
- Forklift Traffic Rated: Designed for heavy industrial equipment and constant traffic
- Thermal Shock Resistant: Withstands extreme temperature changes from hot water, steam, and oils
- Moisture Tolerant: Can be applied to damp concrete—ideal for wet processing areas
Volume Discounts Available
Contact our office for bulk purchase pricing and project quotes.
Call 866-532-3979 or email info@armorgarage.com
